About this 3D model

Summary Picked up this till or cash register if you're not from the UK like me :P, with a missing drawer key someone had wedged the drawer open and it did work, but could not be locked. Replacement keys can be quite expensive for what they are, so I found a google image of the key and put it through a image to stl converter and cleaned it up, with some trial and error on the dimensions I finally came out with a working key. The thicker key top works best as it's more durable and feels less like it'll snap These can be printed in PLA but you may only get a few turns out of them before they break, just don't break it while it's in the lock. Ideally needs to be printed in PETG or ABS, ABS is a pain to print IMO, I used PETG with no real issues. I'd recommend a 100% infill with whatever the strongest pattern your slicer has, I used cura with the cubic pattern for added strength Print Settings Printer: Jazla Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 100 Filament: amz3d PETG Notes: Reccomend printing in PETG or ABS, PLA will work but not for long