About this 3D model

A new set of improved STLs called the MK3+. This set will have all the tweaks and finishes we have worked on over the last couple of months. Instructions and Setup & Calibration Guide also included. These upgrades include: *C1: Added crucial recess for M8 nut - M3x6 screws won’t tap otherwise. F1-3: Reduced height of feet so that M3x16 screws tap better. F2: Added Fixing for nyloc nut A6a: Made hole slightly bigger to accommodate new carbon tube. A6b: Made hole slightly bigger to accommodate new carbon tube, also made a hole in base tighter for tap. A7: Made longer to ensure it grips the pin correctly. A8: Made shorter. B2: Countersunk fixing hole so M3x10 bolt grips the nyloc nut correctly. Additions: T1: Multi-head magnetic screwdriver A9: Scaleable anti-skate weight A10: Shim to lift A1 if felt slip-mat is being used. Note: This STL is in the incorrect orientation and needs to be rotated 180 degrees in your slicer so the flat face is on the bed! *C1 is the only part that is essential to reprint if you’ve already done so, but we recommend reprinting all the new + files as well as the additions.