About this 3D model

Summary If you enjoy my design, please go ahead and like it, as it helps other people find it! This is my custom 3D printer torture test. Retraction Test Bridging Test Cooling Test Flow Test Dimensional Accuracy Test: Use Calipers to measure the cube, dimensions should be 20 x 20 Holes should fit filament through, as the holes are 1.8 mm in diameter Surfacing Test Belt Tension Test Line Width Test First Layer - The bottom right has three different layers. Use a calipers to measure the three heights 0.6, 0.4, and 0.2. Take the proposed and the actual height to help you calibrate your Z height. Overhang Test The entire model is 100 mm by 50 mm If you print this, please upload a picture under makes. I would like to see how it works for you. Thanks!