About this 3D model

This is a book with pages to hold the Bambu Filament Swatches as well as the Compact Filament Swatch . Both types of swatches (if you need additional swatches) and a sample of each swatch holder (to sample the fit of the holder without printing the whole page) are included on a separate plate. Highlights Holds all your swatches in an easy-to-view layout Can pop a swatch out of its holder by pressing on it from the back opening Each page for the Bambu Filament Swatches can hold 40 swatches (8 x 5 layout) Each page for the Compact Filament Swatch can hold 12 swatches (3 x 4 layout) Additional pages can be printed if you are planning to add in your own swatches The front cover, back cover, and pages can be printed in different colors Required parts Bambu Filament Swatches - only required if you don't have it already and plan to print the pages on Plate 2 Binder rings (Amazon affiliate link) - I included a set of multiple sizes in case your book gets thicker Printing notes There are 4 plates (you do not need to print them all) Plate 1: Cover Print this twice to get the front and back cover Plate 2: Bambu Filament Swatch page Print this twice to complete the Bambu Lab set Print as many as needed for additional samples Plate 3: Compact Filament Swatch page Print as many as needed Plate 4: Swatches and sample holders Print as many swatches as needed Print the holders if testing the fit Print by parts if using Bambu Handy to get what you need While almost all of the swatches are a snug fit in the holder, I noticed about 2 swatches in my set that are a tad bit smaller than the rest – they will fit in the holder just fine but end up being much easier to pop out (I find that a tiny piece of tape in the holder will help hold it down)