About this 3D model

No explanation needed if you use the SB CW2. The original stealthburner lever design is thin and there's plenty of room for adding material. We call this the fat_finger mod. If you cannot print one because you only have one printer and the latch broke, contact support@tinymachines3d.com! Print Settings Material: ABS Layer height: 0.2mm. Extrusion width: 0.4mm, forced. Infill pecentage: 40% Infill type: grid, gyroid, honeycomb, triangle, or cubic. Wall count: 4. Solid top/bottom layers: 5. Supports: NONE.