About this 3D model

Material = PLA silver Layer height = 0,2mm Outer wall = 0,42mm Inner wall = 0,45mm Ironing type = No ironing Wall loops = 3 Top shell layers = 4 Botton shell layers = 4 Sparse infill density = 15% Infill/wall overlap = 15% Sparse infill pattern = Honeycomb Outer wall = 200mm/s Inner wall = 300mm/s Sparse infill = 270mm/s top surface = 200mm/s Acceleration: Normal printing = 15000mm/s Initial layer = 500mm/s Outer wall = 8000mm/s Supports = NO Printing time 1h 32min