About this 3D model

Hi MakerWorld! This is our first upload. I hope you all enjoy :) We primarily keep Bambulab and Polymaker filaments in house. You can try filaments from other brands but recommend finding ones with similar transmission distance. I've included those values below. The .3mf file includes color changes in the Preview tab, feel free to adjust or move around as needed. If you have AMS it will automatically do the color swaps for you :) Otherwise if you do not have an AMS, do not worry as you can still perform the color swaps manually at each pause! Filaments Used: PLA BambuLab Matte Charcoal - Transmission Distance: 0.6 PLA BambuLab Basic Red - Transmission Distance: 5 PLA PolyLite Orange - Transmission Distance: 7.5 PLA BambuLab Basic Yellow - Transmission Distance: 6 Swap Instructions: Start with Charcoal At layer #11 (0.96mm) swap to Red At layer #15 (1.28mm) swap to Orange At layer #17 (1.44mm) swap to Yellow for the rest. Dragon Print Settings: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Classic wall generator Frame Settings: back to 0.2mm Layer height 5% Gyroid infil Classic wall generator