About this 3D model

HueForge Fire Dragon created for the Polymaker Fire Color Set . Only manual filament swaps required. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments used Polymaker Fire Color Set: Panchroma Matte PLA Charcoal Black Transmission Distance: 0.3 Polymaker PolyLite PLA Red Transmission Distance: 1.5 Polymaker PolyLite PLA Orange Transmission Distance: 7.5 Polymaker PolyLite PLA Lemon Yellow Transmission Distance: 6.5 Polymaker PolyLite PLA White Transmission Distance: 5 Swap Instructions: Start with Matte Charcoal Black At layer #9 (0.8mm) swap to PolyLite Red At layer #12 (1.04mm) swap to PolyLite Orange At layer #21 (1.76mm) swap to PolyLite Lemon Yellow At layer #31 (2.56mm) swap PolyLite White for the rest. Boost Me Thanks so much for the Boosts!