About this 3D model

Summary Little stand for the TTGO esp32 board with the little lcd display. Fits a 504045 lipo battery inside. If you make it sleep, the battery will last several months (this board uses 0.3 mA on sleep). The USB-C and reset are available thru the case. No need for glue or anything, everything just fits snuggly. NOTE: If your battery has a JST 1.25 connector already, check the polarity carefully with the cable included in the TTGO board. Parts TTGO ESP32 T-DISPLAY: https://s.click.aliexpress.com/e/_ADirut Battery: https://s.click.aliexpress.com/e/_AonIrT Software options Flight radar: https://github.com/rzeldent/esp32-flightradar24-ttgo Clock: https://github.com/kd8bxp/Cheerlights_Clock Print Settings Printer: prusa i3 Rafts: No Supports: No Resolution: 0.2 Infill: 50 Filament: eSun PLA Notes: For the buttons you have 2 options, one is flat (button_on.stl) and the other one is rounded and easier to press. Just place the buttons in position and slide the board inside, match the USB-C port. The cover.stl should held everything in place if you close it properly. Add padding if your battery is smaller than the recommended one.