About this 3D model
Summary MARVEL logo lamp (not tested yet!) This is yet another LED logo lamp with the MARVEL logo, similar to my other lamps. If you want to create this you'll need the following things: -transparent filament for the MARVEL logo, I recommend to add a color change for the last 5 top layers and print them in white -red (or color you want) filament for the lamp case -on/off snap in switch https://www.amazon.com/TWTADE-Position-（Quality-Assurance-Years）XW-604BB1/dp/B07HHVTM7V/ref=sr_1_18?keywords=SPST+2&qid=1579096753&sr=8-18 -Female DC Power Jack Panel Mount with Hex Nut https://www.amazon.com/TOTOT-5-5mm-Female-Socket-Electrical/dp/B077YB75N3/ref=sr_1_16?keywords=DC%2B2%2C1%2Bx%2B5%2C5mm&qid=1579096500&sr=8-16&th=1 -30cm LED Stripe 24VDC -AC/DC Adapter, 24VDC/1A 1.Print the Case, back cover and the inlays for the letter "A" and "R" 2.Print the logo 3.Glue the 2 saved Parts in the Letter "A" and the Letter "R" from the logo 4.Add LED stripes, DC Power Jack and the switch, connect the wires I also added a clean back cover without cutouts. Please let me know in the comments if you would like to see other designs with other brands/logos. # # # This is another LED logo lamp with the MARVEL logo, similar to my other lamps. If you want to recreate this you'll need the following things: -transparent filament for the MARVEL logo, I recommend a color change for the last 5 top layers in white -red (or color of your choice) filament for the lamp housing -built-in toggle switch https://www.amazon.de/gp/product/B00WJLF8OQ/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 -DC 2,1 x 5,5 mm female socket, built-in socket https://www.amazon.de/gp/product/B00FWP5EYK/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 -30cm LED strip 24VDC -AC/DC adapter, 24VDC/1A https://www.amazon.de/JRing-Stecker-Netzteil-Radiowecker-LED-Strip-Lichtleisten-schwarz/dp/B07HQL9JM8/ref=sr_1_fkmr0_1?__mk_de_DE=ÅMÅŽÕÑ&keywords=JRing+Netzteil+24V+DC+1A%2C+EU-Plug+5%2C5%2F2%2C1mm%2C+24W+Stecker-Netzteil+für+Radiowecker%2C+LED-Strip+Streifen%2C+Speedport%2C+Lichtleisten%2C+USB-Hub%2C+Switch%2C+Rout&qid=1579100558&sr=8-1-fkmr0 1.Print the housing, back cover and the inlays for the letters "A" and "R" 2.Print the logo 3.Glue the 2 saved parts in the letters "A" and "R" of the logo 4.Install LED strips, DC jack and switch, connect the wires I have also added a clean back cover without cutouts. If you want to see other designs with other brands, leave your requests in the comments Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 15 Filament: eSUN, Amazon PLA+, PLA red+white, transparent