About this 3D model

【1/23/24】Updated Version: Reduced base plate thickness, saving more material Added grooves to the base plate, which can be embedded with 4 10x2mm magnets or used as hooks Modified the shape of the nails, increased tolerance, easier to embed new version: thickness reduced, less filament used add 4 sockets on the backplate, compatible with 10x2mm cylinder magnets. optimized the shape of the fins and sockets, so they can put together more easily. --- Last year, I bought a P1S printer and have always been printing models downloaded from others. This is my first attempt at modeling myself. Inspired by the "Fu" character ornaments made by my predecessors, I also wanted to try it out, so I made this Spring Festival "Fu" character pendant, please give me more advice. The patterns and auspicious cloud patterns on the frame are hand-drawn, I modeled them in Maya software and then exported them. Because I don't have AMS, I can't print multiple colors at the same time, so I separated them into three plates. The auspicious clouds are on a separate plate, and they can be painted separately if needed. I also designed clips and sockets so that they can be assembled without using glue. Please note during assembly: When installing the golden frame, please note that one of the nails is shorter than the others. This shorter nail should correspond to the shorter hole on the backplate. Additionally, the corner with the shorter hole marks the top corner of the square. This detail will assist you in correctly orienting the sign during installation. Installation Note: When installing the golden frame, note that one of the clips is shorter than the others. This clip should be matched to the shorter hole on the backplate. Additionally, the corner with the shorter hole marks the top corner of the square. This detail will assist you in correctly orienting the sign during installation.