About this 3D model

SCX30 Comp style Conversion Kit, Little Belly Dragger Setup The SCX30 Comp Conversion Kit is a simple but seriously fun upgrade that transforms your stock rig into a low-slung, competition-style crawler. Designed to reuse your existing SCX30 running gear, this kit focuses on improving performance while giving your build a much more aggressive stance. With adjusted shock geometry and a slightly better center of gravity, the kit helps improve stability on climbs and technical terrain. It’s also designed to allow full steering lock without skid rub, giving you maximum steering performance where it matters most. And for a bit of fun… this setup can drop your rig low enough to run it as a full-on belly dragger. ⚙️ Features Converts stock SCX30 into a comp-style crawler rig Lower CG (center of gravity) for improved stability Revised shock geometry for better performance Designed for full steering lock without skid interference Can be built as a low “belly dragger” setup Uses stock running gear for a simple upgrade path ?️ Assembly & Requirements Reuses stock SCX30 running gear Hardware required: 6 × M1.4 × 4mm screws 4 × M1.4 × 5mm screws Build note: Decasing the ESC is recommended to keep the build compact and clean, especially for low-profile setups Light sanding and test fitting recommended Mounting may vary slightly depending on your setup and electronics ?️ 3D Printing Tips Material: PLA+ or PETG recommended Layer height: 0.16–0.2mm Supports: As needed depending on part orientation Wall thickness: ~1.6–2.0mm for strength ? Compatibility Platform: SCX30 Use case: Comp crawler / performance build / low CG setups This isn’t about overcomplicating things it’s about making your rig more capable and more fun to drive. The SCX30 Comp Conversion Kit is a straightforward upgrade that delivers noticeable performance gains with minimal hassle. Nothing fancy just a great, fun kit that works. Download. Print. Build. Crawl.