About this 3D model

It is a part that remodels Kyosho's mini-z 4x4 into a Netflix version lost in space chariot with a 3D printer. Feel free to support me at:https://buymeacoffee.com/andcraft3d Please refer to the stl data and video in "others-assembly_reference" for assembly. Regarding screwsPlease measure the thickness and length of the screws by referring to the 3D data of ”others_assembly_reference_screws” in the shared file.For reference, the thick screws are M2.0mm and the thin screws are M1.2mm. ------------------------------ Reference of print settings All parts are basically 3D printed with a layer height of 0.1 mm. "Body_rear_detail_4-mesh_parts_white.stl" is output by processing gcode only the raft part of the slicer.It is recommended to use an equivalent wire mesh etc. for this part instead of 3D printing. "Glass.stl" is made by cutting a plastic plate with a thickness of 0.3 mm. [Unofficial Fan-Made Work]This is an unofficial fan-made creation and is not affiliated with or endorsed by the rights holder.All rights to the original characters belong to their respective owners. This file is intended for personal, non-commercial use only.Please do not re-upload this file to other platforms. The CC license below applies only to my original 3D modeling workand does not grant any rights related to the original IP.