About this 3D model

This is a Rotating Lithophane box that I created for my family memories. The box spins at .5 rpm so its slow enough to watch and take in the images Print at .2 or finer layer height. I love the bronze color- star wars inserts for reference only. Even tried to color one with packing tape on the back of it and sharpies came out cool. Saw this on a facebook post. I use https://lithophanemaker.com/Framed%20Lithophane.html to make the lithopahnes. The size of the lithophane is 149mm tall by 111mm wide . I put a 3mm border around it to snug it up a little but slides right in and then is capped with the bottom plate for the cage. You need to wire the switch lights and motor to work with the switch. From the power port red wire will go to the light red and motor positive. The black groud wire will go to onde side of the switch then out the other side of hte switch to the light ground and motor ground. Pretty simple wire circut for the switch to work. I have added an alternative power port in the links below as well which gives it a little cleaner look and no need to glue the port it has a nut on it. The parts and filament I used Lights https://amzn.to/3UrwpCn Filament https://amzn.to/3U4cutf Power Supply. https://amzn.to/47FD2UF Motor. https://amzn.to/3vGnl2i Switch. https://amzn.to/3OfsPaD Wire https://amzn.to/3Oc62MP Screws. https://amzn.to/490stN7 Heat Shrink https://amzn.to/3Hq253h3 Soldering Iron https://amzn.to/4aYGxbT Alt Power Port. https://amzn.to/4b3xWEy Thanks Keith