About this 3D model

In the pictures you can see an empty slot. This is where I would put a 0.8mm nozzle. IF I HAD ONE ლ(ಠ□ಠლ) Edit: I finally have one :D This goes well with the other Gridfinity storage bin for hotend socks I've created. Also check out this 2x1 Gridfinity bin which stores 5 nozzles upright. I printed this with a 0.6mm nozzle, but I've added a profile for 0.4mm as well. I printed the Gridfinity box this model is based on, however I was a little unsatisfied about a few things. There was no space for leftover filament (I would have to cut it off; unfortunately for me, I'm lazy) The nozzles where really hard to take out The box height wasn't according to the Gridfinity standard (it was missing a few millimeters) The screw hole cutouts at the bottom were a mess I've improved 1. and 2. by creating a bigger gap above the nozzles. Now filament fits and I can get them out more easily. I have pretty tiny fingers though, so your mileage may vary. Number 3. was easy to fix. Just make it taller so from the bottom to the lip its a multiple of 7 (with tolerance). 4. was fixed by just putting in magnet holes. I've also only put holes on the outer corner of the box, so you use 4 magnets instead of 16 (or also 4 but then way to many useless holes). This may sound like I don't like the original. On the contrary! I love the idea and how snug the nozzles fit. If I didn't like it, I wouldn't remix it! Let me know how I can improve things!