About this 3D model

STL/3MF Multicolor Regular eyes/ 6mm eye sockets Print Settings: Print in PlaceNo Supports neededArachne walls2-3 walls5-10% infillIf you have adhesion issues, try a brim, glue stick or Aquanet hairspray Layer Printable eyes: Big Round Pupil Eyes They aren't as cool looking as glass eyes, but in a pinch, or needing a bulk amount these eyes will be available and quick to print! Because these are 6mm in size, they should fit on any model that has eye sockets. This means that you can also scale both the model and the eyes to different sizes. I have had success at 80% eyes (a little tight but they work!) and 220% size. The only thing to keep in mind is that if you scale massively higher the eye slot in the model might be more visible (you will need to scale the eye larger for it to fit better). Scaling the eyes too small may cause the areas to layer change to merge. Print Settings: Print in Place No Supports needed 2-3 walls 5-10% infill If you have adhesion issues, try a brim, glue stick or Aquanet hairspray For 6mm eye (100% size) printing - layer change/ pause at: 0-1mm black 1-1.4mm Iris color 1.4mm - finish white Smaller layer heights may give better details, likely even a smaller nozzle, which I do not have one of to test. 6mm glass eyes can be easily purchased online from places like Amazon. check “Glass cabochon flat back doll eyes 6mm”