About this 3D model

Utilising HueForge's new 'Metallic Mode' - available in version 0.7.0, I present to you - Gold Queen. Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm. The 3MF will have everything loaded into the file for Bambu Studio / Bambu Printers. If you do not use either, please download the STL and follow the instructions below: Filaments Used: PLA Kingroon Black Transmission Distance: 0.2 PLA CC3D Orange Transmission Distance: 7.4 PLA CC3D Lemon Yellow Transmission Distance: 8 PLA Kingroon White Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Black At layer #11 (0.6mm) swap to Orange At layer #16 (0.8mm) swap to Lemon Yellow At layer #26 (1.2mm) swap to White At layer #30 (1.36mm) swap to Jade White for the rest. _______________________________________ If you'd like to support me, I now have a Patreon ! Joining will give you behind the scenes information on WIPs, access to a private discord, early access, includes models that are otherwise paid, and more! If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon! _______________________________________