About this 3D model
"Print with me if you want to extrude!" Well, yeah … Terminator. Cult. Classic. Terminator 2 is one of the few sequels that excelled in almost every way. And besides Robert Patrick as the T-1000 Arnie as T-800 always will be my all-time favourite. If you are using the one-click 3MF file on Makerworld (aka the “print profile” in the top right), all appropriate settings have been applied to the print (PLA filaments)! Slice it, print it, done. Not a fan of certain settings like the surface pattern? Feel free to change it to something else! If you want to print a fitting frame you might want to try my universal HueForge 200 x 200 mm frame . It comes in several versions, check it out. If you are not using the one-click printing method, or are not using a Bambu printer, read on: Print Instructions (manual settings): print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm I used matte black as the background for the print, but you can use any variation of a dark or black color I used Bambu Lab PLA Matte Ice Blue Filament Swaps (4 colors, 5 swaps): LIGHT VERSION: Start with Black At layer #11 (0.96mm) swap to White At layer #13 (1.12mm) swap to Ice Blue At layer #18 (1.52mm) swap to White At layer #28 (2.32mm) swap to Red DARK VERSION: Start with Black At layer #11 (0.96mm) swap to Blue Gray At layer #18 (1.44mm) swap to Ice Blue At layer #28 (2.32mm) swap to Red Note: I will try another print with darker colors and upload the finished print, Bambu Lab “Blue Grey” is on it's way ... Filament I've used: Black: Extrudr PLA NX2 matt schwarz * Red: eSUN PLA+ firetruck red * Gray: Bambu Lab PLA Matte “Ice Blue” White: Extrudr PLA NX2 matt weiß * Notes: *The used link is a so-called affiliate one. When you buy a product using this link, I will receive a small provision. The price itself does not change. Thanks so much for your support :) I am not affiliated with StudioCanal, Skydance Media, James Cameron or any other license holder nor is this print an official release. It's just a fan and hobby project made at home and should not condone theft of copyrighted material and I don't want to get into even the slightest trouble because of that.