About this 3D model

The Benchy is just as a exsample model, the benchy is made form Creative Tools. My Plan was to Create a High Speed Printer Profile , because the normal “sport and ludicrous" mode often dosn´t give me the desired Results. The Profile is for both . The Standart Bambulab Nozzle and for the Aftermarket High Flow Hotends . If you want to use the normal Nozzle, Please use the normal PLA setting from Bambulab (21mm3/s) The flow test reach in my three tests, a little bit over 32mm3/s. To get a little bit of safety, i set it to “only 30mm3/s” The Settings are made for Bambulab Pla Basic Yellow. Other materials I will add in the future The hotend I used: V1.25 Bi-Metall-Heatbreak-Hotend-Kit für Bambu Lab x1 x1 Carbon-Düse aus gehärtetem Stahl für Bambus-Bauch tücher p1p p1s hotend - AliExpress A High flow hotend form a other Factory: E3D High Flow ObXidian™ HotEnd for Bambu Lab X1/P1 Series (e3d-online.com) (I didn't own so far, but if I can order a E3D High Flow I will test it in the Future.) The profile can be used for all objects. but then I would change the infill to gyroid or grid. For even better quality, I would reduce the layer height. 0.2mm or 0.15mm. This means that you are still clearly superior to the standard profile and save a lot of time I would be very happy for a like, comment or a positive rating. If you have any problems, please describe the problem. Future plans: I want to try a benchy with a Bambulab for under 10 min. But first I'll see how the profile is received by you.