About this 3D model

All the designs i upload, i have to print first, and that's a lot of filament ? And filament isn't free.. So, if you like my work you could buy me a coffee if you like. ? https://www.buymeacoffee.com/a.vdh_83 Or a donation via Paypal is also much appreciated. https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BumbuLab Matte Charcoal Transmission Distance: 0 PLA BambuLab Basic Red Transmission Distance: 4.8 PLA BambuLab Magenta Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 4.8 PLA BambuLab Basic Yellow Transmission Distance: 4 PLA BambuLab Basic Green Transmission Distance: 8 PLA BambuLab Basic Cyan Transmission Distance: 4.8 PLA eSUN White Transmission Distance: 1.6 Swap Instructions: Start with Matte Charcoal At layer #8 (0.72mm) swap to Red At layer #11 (0.96mm) swap to Magenta At layer #13 (1.12mm) swap to Orange At layer #17 (1.44mm) swap to Yellow At layer #20 (1.68mm) swap to Green At layer #21 (1.76mm) swap to Cyan At layer #26 (2.16mm) swap to White for the rest.