About this 3D model

For all Bambu Studio users or anyone who can use a 3mf file, I recommend using the attached 3mf file. For anyone who cannot use a 3mf file all of the stl files are located in the zip file attached. Files Included.. Carrot Top (Minimal Tree Supports Needed)Carrot BottomPotDirtThe Carrot Top should be printed laying down with the Flat back against the build plate using Tree Supports, which are incredibly easy to remove. All of the other models are printed with NO supports. Please ensure you have proper bed adhesion for all of your models. I like to use a textured build plate with the bambu labs liquid glue stick. All of my models are printed on stock Bambu Labs X1C or P1S printers using the standard 0.04mm nozzle and a 0.16mmm (Maximum) layer height. I will use a 0.12mm layer height if I have the extra time for a nicer finish. I use the 4 Color AMS system to print the models in color. FILAMENTS IN PHOTO ABOVE: Carrot Filaments: iSANMATE Gradient Red+Orange PLA Carrot Top Filaments: Stronghero3D Summer Green and Autumn PLA Pot: Eryone Matte Pottery Red PLA The carrot top threads into the carrot bottom and the dirt threads into the pot. There is a hole thru the dirt/pot for the carrot to be placed into and poked up and out of the hole. Please let me know if you have any questions. Thank you! Mike