About this 3D model

(english description see below) The spool holder is designed for spools weighing between 750 grams and 3 kg. The spool width can be freely adjusted from 45 mm to 120 mm using two sleeves. This ensures that the spool is securely held and does not drift back and forth. The holder can be mounted in any position, from wall mounting to ceiling mounting to table stand. However, a secure attachment using screws is always recommended. Assembly note: Glue the hexagon screw head with super glue. Everything you need: 1x Hexagon screw M8 x 100 mm (full thread up to the screw head) 1x M8 nut Alternatively: 1x Hexagon screw M8 x 70 mm (full thread up to the screw head) 1x Ruthex threaded insert M8 (melt-in nut) ++++++++++++++++++++++++++++++++++++++++++++++++ The spool holder is designed for spools weighing between 750 grams and 3 kg. The spool width can be freely adjusted from 45 mm to 120 mm using two sleeves. This ensures that the spool is securely held and does not drift back and forth. The holder can be mounted in any position, from wall mounting to ceiling mounting to table stand. However, a secure attachment using screws is always recommended. Assembly note: Glue the hexagon screw head with super glue. Everything you need: 1x Hexagon screw M8 x 100 mm (full thread up to the screw head) 1x M8 nut Alternatively: 1x Hexagon screw M8 x 70 mm (full thread up to the screw head) 1x Ruthex threaded insert M8 (melt-in nut)