About this 3D model
These Bananas are long overdue. I made an earlier version much earlier this year and I wasn't crazy about how it tuned out so it was never released. I finally modified it and I hope everyone else likes it as much as we do. I will most likely make a few banana variations, eventually. I also wanted to make a little crate or some kind of accessory and my wife suggested a little hammock for the banana :-) If anyone wants to shoot me a DM or chat and let me know what you think. If you want to make Banana Magnets there is a pause added into the slicer at layer 25, when printing at a 0.16mm layer height. Once the printer pauses, simple place (1) 8x3mm magnet into each hole and then press resume on the printer. The printer will print directly over top of the magnets concealing the magnets inside and turning the bananas into little magnets. The magnets can be purchased from Amazon... https://a.co/d/1bVKYKB If you are planning on making the keychains, the ball and chains fit perfectly thru the little hole... https://a.co/d/c4BRqhH For all Bambu Studio users or anyone who can use a 3mf file, I recommend using the attached 3mf file. For anyone who cannot use a 3mf file all of the stl files are located in the zip file attached. PLEASE NOTE: Due to the light colored yellow body and black eyes I had to increase the wall thickness to 3 and the "Flushing Volume" multiplier to 2 to resolve a bleed issue I experienced on early prints. ALL of these designs are printed with NO supports & NO Brim. Please ensure you have proper bed adhesion for all of your models. I use a Textured Build Plate with Bambu Labs liquid glue. All of my models are printed on stock Bambu Labs X1C or P1S printers using the standard 0.04mm nozzle and a 0.16mmm (Maximum) layer height. I will use a 0.12mm layer height if I have the extra time for a nicer finish. I use the 4 Color AMS system to print the models in color. FILAMENTS IN PHOTO ABOVE: I used a Silk White for the eyes to get that shine. Silk White: CC3D Silk White pla - https://a.co/d/43qGMHu Silk Red: CC3D Red Silk pla - https://a.co/d/1cEBJp7 Yellow: Creality Matte Yellow pla - https://a.co/d/ja4kxMf Please let me know if you have any questions. Thank you! Mike