About this 3D model

Summary This project is super Cool! Nanoleaf Lines but at a fraction of the cost. and there is NO SOLDERING involved Parts List BTF-Lighting WS2812B Eco 300LED 5M: US | UK | CA | DE | FR Aluminium Led Diffuser Channel Shallow w. Mily Cover: US | UK | CA | DE | FR 3D Printed Connector Piece (in Files) Nano Gel Tape(Try to find in Hardware Store): US | UK | CA | DE | FR Cable Channel (Try to find in Hardware Store): US | UK | CA | DE | FR IKEA KUGGIS Cable Box: US | UK | CA | DE | FR Arduino Uno R3: US | UK | CA | DE | FR 400 tie Point Breadboard MB-102: US | UK | CA | DE | FR Dupont Wires Assorted Kit: US | UK | CA | DE | FR (OPTIONAL) Hook-up Wires 28AWG: US | UK | CA | DE | FR 100uf-1000uf Capacitor: US | UK | CA | DE | FR 220-440 ohm Resistor: US | UK | CA | DE | FR Terminal Block (ONLY FOR NORMAL SIZE PSU): US | UK | CA | DE | FR 5V Power Supply (Amps = LEDs x 0,06) --------- Normal Size (Up to 10A): US | UK | CA | DE | FR --------- Full Size (Up to 50A): US | UK | CA | DE | FR Power Supply Cable --------- For Normal Size: US | UK | CA | DE | FR --------- For Full Size: US | UK | CA | DE | FR Circuit Setup Animations https://youtu.be/w8k6eex0uW8 CODE View in Files HOW TO SET UP Cut your LED Profiles to Size with any Saw Click a Connector Piece to a LED Profile and feed the LED Strip through the Connector Piece and repeat until design is done Connect components together by looking at Circuit setup and put in cable box Install Cable Channels on the wall without Covers Connect Hook-Up Wires or M-F Dupont Cables to Extension Cables Put Cables in Cable Channel Put Nano Gel Tape on Connector Pieces, and Install on the wall Connect Night Strip to Hook-up Wires Put Cable Channel Covers On Plug In Power Cable Project Should Light Up App-controlled version coming very soon A WLED Version is coming very soon