About this 3D model
Shining : Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #16 (1.36mm) swap to Jade White for the rest. Matrix : Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Black At layer #7 (0.64mm) swap to BambuLab Green At layer #9 (0.8mm) swap to Yellow At layer #12 (1.04mm) swap to Jade White for the rest. The Truman Show : Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Marine Blue Transmission Distance: 2 PETG JAYO White Transmission Distance: 6 !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Silver At layer #11 (0.96mm) swap to Black At layer #18 (1.52mm) swap to Marine Blue At layer #20 (1.68mm) swap to White for the rest. Kill Bill : Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PETG JAYO White Transmission Distance: 6 !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #14 (1.2mm) swap to Yellow At layer #21 (1.76mm) swap to White for the rest.