About this 3D model

Boost Me Thank you for your support! Thank you for your support! Description This is an air filter suitable for sealing 3D printer models such as BambuLab P1S/X1/X1C. You are free to install filter materials inside, including but not limited to: activated carbon, potassium permanganate balls. You can install cylindrical or granular fillers with a diameter greater than 3mm. Warning To ensure that the air filter does not soften due to excessive chamber temperatures during use, it is strongly recommended to print using materials with slightly higher softening temperatures, such as PETG or ABS. Please avoid printing with PLA materials. Instructions This is an air filter suitable for the sealing 3D printer models such as BambuLab P1S/X1/X1C. You are free to install filter materials inside, including but not limited to: activated carbon, potassium permanganate balls. You can install cylindrical or granular fillers with a diameter greater than 3mm. Warning In order to ensure that the air filter is not softened by the high temperature in the chamber during use, it is strongly recommended to use materials with slightly higher softening temperatures such as PETG or ABS for printing. Please avoid using PLA materials for printing.