About this 3D model

Official Release – The Flexi Kangaroo is Now Live! Hey Everyone!We’re super excited to announce that the Flexi Kangaroo is officially available for download!A bold jumper with loads of personality, this kangaroo brings the spirit of the outback right to your 3D printer! Flexi Kangaroo – Energetic, Expressive & Aussie-InspiredWhether you choose the upright Standard Kangaroo or the nurturing Mama Kangaroo with her adorable joey, this model is full of fun, flexibility, and character. Key Features:Two Body Variants: Standard Kangaroo – Proud and alert Mama Kangaroo – Includes a separate baby kangaroo (joey) you can print and place inside her pouch! Two Hand Styles (Interchangeable): Normal Hands – Relaxed and natural Boxing Gloves – Add a punch of playfulness Mix and match across all versions – customize your kangaroo your way!Fully Articulated & Print-in-PlaceNo supports needed Heads Up!If the head fits too tightly when connecting to the body, apply gentle pressure to snap it into place. It should rotate smoothly with a full 360° range. Still too tight? Try scaling the head up by 1–2%. Files Included:3MF for easy multicolor slicingSTL for all parts – bodies, hands, and joey Recommended Print Settings:Bambu Studio / Bambu Slicer:Layer Height: 0.16 mmInfill: 15%, GyroidWall Count: 2No supports or assembly needed Minimum Recommended Downscale: 30% Filaments We Used:Bambulab Matte: Dark Chocolate, Sakura Pink, Desert Tan,Scarlet RedZiro Matte: Wood Grain, Rainbow BlazeIsamate: Rainbow Peony PinkPolymaker Polyterra: Fall Feel free to Share your Makes and tag me on Social Networks if you print it! You can support me here: Instagram: https://www.instagram.com/toonzfactory/ ALL Toonz Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent. To legally sell them, you may obtain my permission through thislink: myminifactory.com/users/toonzfactory?show=tribe https://www.patreon.com/Toonzfactory Thanks for your support, you guys are the best! ;)3D printing settingsQuick heads up! If the head fits tight, apply a bit of force when connecting the head socket to the body ball. Once in, revel in a full 360-degree rotation. If the fit is still snug, consider a 1-2 percent size increase for the head, This should resolve Head fitting issues.. Happy printing, everyone! Minimum downscale it by up to 40% of its original size. To print the head, you can use an outer brim or a raft to ensure there are no issues during printing. Bambu Slicer Settings Layer Height :- 0.16 mm Wall Count:- 2 Infill Pattern :- Gyroid Infill:- 15% Rest As Defaults