About this 3D model

Lore This is a large artillery piece for a middle eastern grimdark trench faction. Roughly based on a mix between the Dardanelles Gun, and the artillery used by the Ottomans in WW1. I added an alchemical component, alchemical *balls* are loaded with alchemical symbols for phosphorous, sulfur, and silver. The balls are inert when loaded, alchemical tanks mounted on the rear and piped in through the *udder* on top the main gun will flood the chamber transforming the projectile and creating a highly volatile liquid, the operator would pull the firing pin, creating a spark and igniting the charge. This would fire molten balls of sparking silver all over hells forces. Model The model can be printed on small print beds. It has been printed on an Bambu Labs A1 Mini and comes in multiple parts. I have added pins where feasable, but many of the parts are small and so will need to be glued on (Angle Wheel, Short Ladders, and Skirts) This model also contains *FREE* artillery clutter, also found in the terrain model pack through this storefront. Full list of files below IE_Artillery_Lrg_Angle_Wheel.stlIE_Artillery_Lrg_Forward_Base.stlIE_Artillery_Lrg_Left_Base.stlIE_Artillery_Lrg_Left_Ladder.stlIE_Artillery_Lrg_Left_Wheel.stlIE_Artillery_Lrg_Main_Barrel.3mfIE_Artillery_Lrg_Main_Barrel.stlIE_Artillery_Lrg_Right_Base.stlIE_Artillery_Lrg_Right_Ladder.stlIE_Artillery_Lrg_Right_Wheel.stlIE_Artillery_Lrg_Skirt.stlTerrain_Pack_IE_Cannon_Ball_1.stlTerrain_Pack_IE_Cannon_Ball_2.stlTerrain_Pack_IE_Hose_Pile_1.stlTerrain_Pack_IE_Hose_Pile_2.stlTerrain_Pack_IE_Tank_Single.stlTerrain_Pack_IE_Tank_Wall_1.stlTerrain_Pack_IE_Tank_Wall_2.stl This project is an independent production and is not affiliated with or sponsored by Factory Fortress Inc or Trench Crusade.