About this 3D model

This is a fairly simple design that I thought would be useful to other modellers. Most modellers have their station on their baseboard and are about 19mm high. This design is a pair of platform access steps for passengers to access the platform. I have created two designs of which are about 57mm wide, 27mm deep and about 34mm high. These designs have been designed to be printed on a Filament or a Resin Printer. These items have been designed at 1/76 scale but can be printed at other scales.Primarily, these items have been designed to be printed on an FDM printer, but can also be printed on a Resin Printer.designed at OO gauge, 1/76.2 scale.for HO gauge print at 87%, 1/87 Scale,for TT120 gauge print at 63.5% 1/120 Scale,for O gauge UK at 175%, 1/43.5 Scale,for O gauge International print at 158%, 1/48 Scale,for N gauge print at 51.49%, 1/148 Scale, (Caution: I have not printed this model in N gauge, so can’t guarantee its printability) The examples in the pictures were printed on a Bambu Labs A1 FDM Printer.As normal with my designs, there is a balance between accuracy and printability, hopefully not affecting the look of the model too much. This design was especially difficult to get a balance between accuracy and printability. For FDM printing I used a 0.4mm nozzle and a layer height of 0.12mm using PLA filament. I recommend used the following Filament: ELEGOO PLA+ Filament 1.75mm Grey 1KG - https://amzn.to/4r1qQIM (Affiliate Link) If you like my designs then please would you support me through my Patreon account - https://www.patreon.com/PJD1974, any money raised helps me research, design, and develop new items for me to share. For £1 a month, you will give me basic support and for £4 you will get insight into my new designs and be able to contribute to my future projects. Please check my Website, **https://sites.google.com/view/pete3dprintinghelp/home** My website has lots of useful info. If you like my content and would like to buy me a coffee to say Thank You, then please click this link https://ko-fi.com/petes3ddesigns