About this 3D model

Designed to hold a Hantek DSO4102C oscilloscope on an Amazon Basics dual monitor stand. You have limited rotation adjustment and cannot use the quick release function on the stand. Holes made for M5 x 0.8 x 25mm socket head machine screws, no tapping required. 10 walls on 0.5mm nozzle to give plenty of support to the screws. I used a piece of aluminum for my lower clamp but added a printable one for the angle grinder impaired. I never printed the lower clamp but no reason it shouldn't work. I added a strip of double side tape between the upper clamp and the DSO case to make sure there was no slip.