About this 3D model

I had already printed and mounted on an X1C the “Bambu X1C/P1S side mount spool holder v2” (thank you, BC Designs!) and when I decided to also use one of the many Y connectors that can be found on Makerworld I realized that the support for the filament was an obstacle to attaching the Y connector to the X1C. I then decided to design a stand to stabilize the Y-connectors to the “spool holder v2” and I upload my result here. I chose to fix the connector with two nylon cable ties, that’ll fit any type of connector, but you could easily use some kind of adhesive as well. The 2 10x3 mm magnets are enough stable for me, but there is also the possibility of using a small screw. I'm a PETG lover, but you could use any kind of filament, also it is a tiny piece, so print it with a good brim, I don't use supports, but the small overhangs need some cleaning at the end. I hope that someone, like me, will really appreciate both of these accessories, so will be able to use them at the same time in a stable way. Good 3d printing to everyone!