About this 3D model

NOTE: I have not test printed it myself. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Blue At layer #6 (0.56mm) swap to Red At layer #10 (0.88mm) swap to Jade White for the rest.