About this 3D model

A 150mm x 100mm print of a bear walking through the forest. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA+ Sunlu Dark Gold (Dark Brown) Transmission Distance: 1.8 PLA+ Sunlu Coffee Transmission Distance: 3 PLA Kingroon White Transmission Distance: 8 Swap Instructions: Start with Black At layer #15 (0.72mm) swap to Dark Gold (Dark Brown) At layer #18 (0.84mm) swap to Coffee At layer #27 (1.2mm) swap to White for the rest.