About this 3D model

I needed to mount some monitors to the wall but i wanted them to stay as close to the wall as possible while still using standard hardware and spending as little filament as possible. This is what came out. Print: 4x vesa-mounting-screw-holder.stl 1x vesa-100mm-holder.stl You'll need:4 x M4x25mm screws 2x 8mm wall anchors 2x 4.5x30mm "wood" screws (or longer screws, but 30mm is the minimum lenght) Optional:2x M3x30mm screws 2x M3 Nuts You'll need the M3 hardware only if you want to adjust any of the sides height individually, in case you didn't install the 2 attachment screws to the wall leveled. My monitor weights about 4kg and it holds rather fine, i feel that the weakest part of the assembly are the M4 screws themselves, the mount is very solid.