About this 3D model

Featured Remixes/Mods Is your Lithophane to bright? Check out my Solution and Brightness Controller Case This is an optimized Version of Bambu Labs Lithophane Frame. Closed Frame wider Angle for the Hinge less Material about 103gr on a minimum reduced Support Structure Hinge is removable to replace it e.g. with a wall hook closing mechanism many small improvements NEW v2 Online shorter Pins lower risk of breakage NEW v2 - " long Bottom" Online features of v2 + 8mm higher Frame - extension under the bottom for wider angles of the Frame Instructions Lithophane: https://wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions Bambu Store Links PLA CMYK Lithophane Bundle: https://eu.store.bambulab.com/products/pla-cmyk-lithophane Bambu CMYK LED Backlight Board: https://eu.store.bambulab.com/products/bambu-cmyk-backlight-board?variant=46880852935004 RELEASED 20231213 Issue: Oftentimes reported broken Pins I try to reduce the broken Pins by reducing the length. If the Test is good theres an update this evening (20231213). Second issue is reducing the thickness of the clamps on the back to also reduce the broken ones. And i plan to release a second bottom Part to increase the height of the Frame to make a larger angle possible because of long usb c Cables. Stay tuned