About this 3D model

SOCKETSINFO:My recommendation: This system is optimized for these clips using 5mm ball magnets. It requires an investment in ball magnets. Inserting the magnets is a one-time task that you can easily do during a movie night or two. After that, you’ll have a system that lets you assemble setups just like LEGO. Enjoy the Power of Ball MagnetsTIP:Depending on your Scaling you should try the Clips for Downscaling or Upscaling(all 3 Clips optimized for 5mm ball magnets) -> use "C_SOCKET-CLIP_80downscaling.stl" printing at 80% scale-> use "C_SOCKET-CLIP.stl" printing at 100% scale-> use "C_SOCKET-CLIP_120upscaling.stl" at 100% scale OpenLOCKINFO:OpenLOCK Clip System by Printable Scenery:My recommendation if you can't or don't want to use magnets and would like to use a modular SystemTIP:Depending on your Scaling and your Print Result you may want to scale the Clips (they fit then tighter or stronger!)Please make sure you test print your clips before printing them in large quantities for your project! LOCKSINFO:My own clips: Not suitable for modular setups. Designed for permanent setups in combination with adhesive. There are also adapter clips available to connect to SOCKETS or OpenLOCK.TIP:Depending on your Scaling and your Print Result you may want to scale the Clips (they fit then tighter or stronger!)Please make sure you test print your clips before printing them in large quantities for your project! Any Questions? Please get in touch and join my Discord: https://discord.gg/m2APf43w7g