About this 3D model

Parts : 5pcs M4 X 16mm 5pcs M4 hex nut 1pcs PC4 M5 PTFE connector AMS : There seems to be different versions of the AMS. So before you print the clamps, check the rib size of your AMS. If you have 4 Ribs wich are 65mm - 86mm - 65mm appart, you can print the clamps like they are in the print profile. If you have 6 ribs wich are about 45 - 43mm appart you have to just print the "Clamp_small_18mm" at least 3 times