About this 3D model

It's really annoying when the whole room smells extremely of ABS or ASA prints. It's also not healthy. The small filter in the Bambulab X1C doesn't do much either. So, the exhaust air is drawn through a large filter again. As a printer connection, I used the P1S, X1 exhaust adapter 90° 4-inch hose connection from “dankuchta”. The filter box is then connected to the exhaust adapter with a piece of 4-inch hose. Inside the filter box sits a 12V DC 120mm fan to support the small fan in the Bambulab printer. The fan is connected to a small power supply 12VDC 500mA. The space between the grids is completely filled with activated carbon. Depending on the carbon, (grain size) different grid sizes can be used. Currently, there are 3 different sizes available. The filter works really well, there is no more smell of ABS or ASA!