About this 3D model

This is the component set by Bambu Lab for the A1&A2L printer. The AMS lite Top Mount setup is a tested solution for mounting the AMS lite on top of the A1&A2L printer. The component set consists of two main modules: Top Mount Bracket (For both A2L & A1) Z-Axis Stiffener(Only for A1) The Top Mount Bracket is meticulously designed to be tilted to the front for better balance. Additionally, the upper half of the bracket can spin left and right, providing easier access to the back spools. The Z-axis Stiffener is designed to dampen back-and-forth printer movements. Thanks to the special elastic damper design at the bottom, there is minimum wobble even when printing in ludicrous speed with AMS lite fully loaded. Assembly Installation guides for different printer models are available at the links below: A1: https://wiki.bambulab.com/en/a1/manual/ams-lite-top-mount-tutorial A2L: https://wiki.bambulab.com/en/a2l/manual/a2l-ams-connection-guide Here is a tutorial video for the installation: You can also buy the required hardware as a kit from here: http://store.bambulab.com/products/ams-lite-top-mount-screws-kit