About this 3D model

This Little Peanut Package Prints as Two Parts, both tray and shell are printed with the back of the package against the print bed. SUPPORT is Required for the inside of the shell. Tree Supports are then very easily removed from inside of the shell. Load the tray into the shell, "BOTTOM" side down, load in your peanuts and slide the tray in. The Tray will have some resistance. The resistance is intentional so when you push the tray up from the bottom it pops open to reveal your nuts. Have fun :-) If you have a single color printer you can easily achieve a multi-color print simply by swapping your filament to red for the text on top after the white shell and tray have printed . These models were printed on stock Bambu Labs X1C or P1S printers using the standard 0.04mm nozzle and a 0.20mmm layer height. Please let me know if you have any questions. Thank you! Mike