About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG BambuLab Basics Blue Gray Transmission Distance: 2.7 PETG BambuLab Basics Gray Transmission Distance: 3 PETG BambuLab Basics White Transmission Distance: 3 Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #19 (1.6mm) swap to Gray At layer #24 (2mm) swap to White for the rest.