About this 3D model

I revised This Valentines Pickle Heart container by adding a little dimple to hold the lid in place and added finger notches on the sides to remove the lid. Please note there are 4 lid options included, there are all laid out in the 3mf file. 2 lids have colored text, 1 blank lid and one recessed lid. (shown in photo above) All of my models are printed on stock Bambu Labs X1C or P1S printers using the standard 0.04mm nozzle and a 0.16mm layer height. I use the 4 Color AMS system to print the models in color. If you print the Keychain version these little ball and chain keychains fits perfectly thru the hole... https://a.co/d/91ahEnS The Main Pickle in the above video and the containers were printed at 100%. The mini pickles inside the container were printed at 50%. All of the models are Print-In-Place using NO Supports. All of the models were printed on Bambu Labs printers using default settings and the 4 color AMS system. I used Stronghero3D Autumn pla - https://a.co/d/ja4kxMf for the pickle All other filaments not mentioned are standard solid pla filaments. Please let me know if you have any questions. Thank you! Mike