About this 3D model

I may have gotten a little carried away with this crate but I really had fun with it. It is all printed as one piece, No Support, and folds up with a working latch. This might honestly be my favorite crate/package I have done so far. Instead of using colored text I debossed the text and it really adds depth and looks great as a single color model. I printed the crate with a single light wood color pla and did a black rub & buff on it to give it that vintage look. I also included a mutli-color crate in the 3mf file. Please Note: I revised the original banana model and ALL the new bananas files are attached here! I made three adjustments to the original banana model... 1.) I scaled down the model to 75% (This came as a decision to make the banana a bit smaller and more comparable to the pickle size and fit better into a package/crate) 2.) I fixed a rough area on the original banana lip. 3.) Adjusted banana mouth so it doesn't open as far. _____________________________________________ Please note the Crate 3mf file contains 4 crates. One Crate says "Bananas 4U" and the other crate says "I'm Bananas 4U. and there is a solid color or a two color option for each crate. If you want to make Banana Magnets there is a pause added into the slicer at layer 25, when printing at a 0.16mm layer height. Once the printer pauses, simple place (1) 8x3mm magnet into each hole and then press resume on the printer. The printer will print directly over top of the magnets concealing the magnets inside and turning the bananas into little magnets. The magnets can be purchased from Amazon... https://a.co/d/1bVKYKB If you are planning on making the keychains, the ball and chains fit perfectly thru the little hole... https://a.co/d/c4BRqhH For all Bambu Studio users or anyone who can use a 3mf file, I recommend using the attached 3mf file. For anyone who cannot use a 3mf file all of the stl files are located in the zip file attached. PLEASE NOTE: Due to the light colored yellow body and black eyes I had to increase the wall thickness to 3 and the "Flushing Volume" multiplier to 2 to resolve a bleed issue I experienced on early prints. ALL of these designs are printed with NO supports & NO Brim. Please ensure you have proper bed adhesion for all of your models. I use a Textured Build Plate with Bambu Labs liquid glue. All of my models are printed on stock Bambu Labs X1C or P1S printers using the standard 0.04mm nozzle and a 0.16mmm (Maximum) layer height. I will use a 0.12mm layer height if I have the extra time for a nicer finish. I use the 4 Color AMS system to print the models in color. FILAMENTS IN PHOTO ABOVE: I used a Silk White for the eyes to get that shine. Silk White: CC3D Silk White pla - https://a.co/d/43qGMHu Silk Red: CC3D Red Silk pla - https://a.co/d/1cEBJp7 Yellow: Creality Matte Yellow pla - https://a.co/d/ja4kxMf Please let me know if you have any questions. Thank you! Mike