About this 3D model

This is a custom parts collection for the ITX PC case FormD T1, including handles, feet, and rear panel spacers. To assemble you need: each Handle 3x M3x8mm screws, 3x M3 hex nuts each Feet 2x M3x8mm screws, 2x M3 hex nuts GPU spacer 2x M3x4mm screws M/B panel spacer 2x M3x6mm screws, 2x M3 hex nuts Assembly Handle: Secure the handle to the top panel using M3 screws and nuts. While it's possible to directly use nuts on panel, I recommend using a 'nut bracket' to avoid scratching the panel. The handle has versions for the front and rear, so be careful not to mix them up! Assembly Feet: Secure the legs to the bottom panel using M3 screws and nuts. While it's possible to directly use nuts on the panel, I recommend using a 'nut bracket' to avoid scratching the panel. Assembly GPU Spacer: Print spacers according to the size of the GPU you will use and fix them with M3 screws. Assembly M/B Spacer: Secure the M/B spacers using M3 screws and nuts. Assembly M19 Cover: Print a design of your choice, either A or B, and fit it into the M19 hole. Note: My case version is v2.0, and it accommodates a 67mm CPU cooler and uses in GPU 2 slot mode. 'GPU_Spacer_B20.stl' fits perfectly.