About this 3D model

The K-Team ProBox Organizer is a all-in-one transport box, organizer and foldable dice tray and compatible with the tabletop game Kill Team (not Hivestorm). If you are looking for the ProBox that is compatible with Kill Team Hivestorm, please check this object: Link Dimension (xyz): 192 x 162 x 53 mm The original ProBox is a dice tray and a practical storage and dice box for your tabletop gaming accessories. The box has a dimension of 192 x 162 x 53 mm and this size is almost doubled when activating the dice-tray mode :) It's recommened to glue an appropriate felt or similar on the inner surface so you can roll your dice as a pro. The organizer offers space for all your token, markers, template, dice and cards you need for your game. Content & description ProBox_body_top: upper part of the box, it's recommenend to glue a felt on the surface ProBox_body_bottom: lower part of the box, it's recommenend to glue a felt on the surface ProBox_body_top_diceplate: top body part but with a printable diceplate ProBox_body_bottom_diceplate: lower body part but with a printable diceplate ProBox_diceplate: separate diceplate for the top or bottom part of the ProBox if you want to print it with another material (e.g. TPU) ProBox_hinge_onepiece_wide tolerance: set of hinges as one printable part with a wider tolerance (you need to cut the hinges with a knife in order to break the inner contacts) ProBox_hinge_onepiece_tight tolerance: set of hinges as one printable part with the standard tolerance (you need to cut the hinges with a knife in order to break the inner contacts) ProBox_hinge_multipart: set of hinges as a multipart if you have issues with the tolerances of the standard hinges. You need to glue the hinge part locker with a little bit of superglue ProBox_slidingclosure: set of sliding closure and now without the brand / website on the surface for design reasons KTeam_ProBox_insert_organizer: organizer insert for the ProBox KTeam_ProBox_insert_box_small: first box for the organizer insert KTeam_ProBox_insert_box_big: second box for the organizer insert Assembly https://www.youtube.com/watch?v=WKvaHR6r5nY Superglue Opt. felt for dice rolling (173 x 140mm) It's recommened to use some sort of felt for the inner side of the ProBox for a smooth dice rolling. So this is the first step: Glue the felt on the inner sides. As an alternative, there are .stl files available of a ProBox with an in-built roughened inner surfaces and also extra plates that you can print with another material (e.g. TPU) and glue it on the surface. As a second step you would need to glue the hinge to the sides by using some superglue. Note: Here I'm using two sheets of self-adhesive felts but you can also use any other felt or material. Or just print the box in a version with a roughened surface without the need of any material to use.