About this 3D model

~~Iced Coffee Turtle Commercial Use Bonus File Feb 2025~~ Here is this month's Commercial Bonus File: the Iced Coffee Turtle! I so badly want a really good clear filament (maybe one of these days!) but since we aren't quite there yet, this model has two versions - one with a lid, and one without (lid can be printed separately). The best translucent filament I have is Bambu PETG Translucent - I printed the seperate lids with this filament at 20 mms and at .28 layer height. In the pictures you can see the difference in the lids printed this way (Turtles on the right side). The separate lids will need supports. If you weren't part of this Patreon/MMF Tribes in previous months, here is the deal with this file: A Commercial Use file Bonus Turtle for all tiers for its specified month. This turtle will not go into the Welcome folder, and will only be sold on Cults and MMF as a Commercial Use file when its month is over. The only way to get these files will be from being a Patreon or MMF Tribes subscriber for the month it is released in, or buying it off of cults/MMF store at a later date. Once you receive it/buy it you can sell physical copies (only) for life. I'm hoping this will help slowly building up a person's collection of CU files, while also adding more value to subscribing. Print Settings: Print in Place No Supports needed *(Separate lids will need supports) 2-3 walls 5-10% infill If you have adhesion issues, try a brim, glue stick or Aquanet hairspray Do to the nature of this file being CU, I've included the Big round pupil eyes file that fit in this model below. You can also search online for "6mm cabochon flatback doll eyes" for eye that can be glued into these models. Layer Printable eyes: Big Round Pupil Eyes They aren't as cool looking as glass eyes, but in a pinch, or needing a bulk amount these eyes will be available and quick to print! Because these are 6mm in size, they should fit on any model that has eye sockets. This means that you can also scale both the model and the eyes to different sizes. I have had success at 80% eyes (a little tight but they work!) and 220% size. The only thing to keep in mind is that if you scale massively higher the eye slot in the model might be more visible ( you will need to scale the eye larger for it to fit better). Scaling the eyes too small may cause the areas to layer change to merge. Print Settings: Print in Place No Supports needed 2-3 walls 5-10% infill If you have adhesion issues, try a brim, glue stick or Aquanet hairspray For 6mm eye (100% size) printing - layer change/ pause at: 0-1mm black 1-1.4mm Iris color 1.4mm - finish white Smaller layer heights may give better details, likely even a smaller nozzle, which I do not have one of to test. Filaments Used: Bambu matte tan and brown, Elegoo white, Eryone translucent/ Bambu PETG clear