About this 3D model

Summary Since I bought a filament dryer ( Sovol 3D ) I had some issues with tension on the filament input on my Anker M5. This was related to the angle filament entering the machine. (Sovol 3D) So I resolved that by using the original filament holder, which already worked fine but since I added this Filament guidance spool it goes even smoother. When doing higher pints it might happen that the filament falls of the spool, to resolve that I added a Support over the spool. (Thanks to HiShak for pointing this out!) It looks like the support has a nice opening to guide the filament trough, I would not recommend this, this will add more friction to the process. I just added some empty space to save filament. Filament Spool: Made for Anker M5 but can be used on all filament holders. Dimensions: Inner circle: 9mm Diameter: 56mm Width: 38 mm Filament Support: Specially made for the Ankermake filament holder extension bar. For the Ankermake M5 users, i added the pre-sliced GCODE files for printing with PETG Print Settings Supports: Yes Resolution: 0,2 Infill: Spool 5% - Support 10% (lines) Filament: BASF PETG / PLA Orange Notes: Post-Printing Antislip For the Filament Support, I added a 1mm adhesive vinyl on the inside so it stays in position but it is still possible to slide the support back and forward.